Standard Scale Connection BEMACON-ERROR
BEMACON error messages
BEMACON Error Messages
| Number | Text |
|---|---|
| 001 | unknown scale protocol &1 |
| 002 | scale protocol &1 is not installed |
| 003 | no connection to &1 port &2 error &3 |
| 004 | error at &1 error &2 |
| 005 | scale &1 not found |
| 006 | HTTP error status &1 |
| 007 | invalid scale data format &1 |
| 008 | scale timeout after &1 seconds |
| 009 | scale does not react on command &1 |
| 010 | material number &1 not found |
| 011 | material &1 has no gross weight |
| 012 | material &1 has no unit |
| 013 | tare is greater than gross weight |
| 014 | error on writing to &1 |
| 015 | alibi memory is not installed |
| 016 | invalid scale command &1 |
| 017 | error &1 &2 file &3 in alibi memory |
| 018 | CRC error when writing on &1 |
| 019 | error simulation in alibi memory |
| 020 | underload |
| 021 | overload |
| 022 | scale not stable |
| 023 | scale wrong &1 |
| 024 | clear tare not supported |
| 025 | switch to different scale has failed |
| 026 | scale protocol &1 not supported |
| 027 | toke &1 was not found |
| 028 | invalid weight unit &1 |
| 029 | message has only &1 characters |
| 030 | invalid number |
| 031 | invalid decimal number |
| 032 | weight is negative |
| 033 | connection was closed unexpectedly |
| 034 | COM port &1 not found |
| 035 | access to &1 denied |
| 036 | scale has no internal alibi memory |
| 037 | file &1 not available after &2 seconds |
| 038 | Date &1 invalid |
| 039 | Time &1 invalid |
| 040 | Plate Number &1 invalid |
| 041 | Unknown protocol &1 |
| 042 | invalid answer &1 |
| 043 | no carriage return found |
| 044 | invalid start character &1 |
| 045 | invalid function code &1 |
| 046 | invalid bit string &1 |
| 047 | invalid length &1 |
| 048 | operation failed &1 |
| 049 | invalid bit &1 |
| 050 | invalid state &1 |
| 051 | invalid duration &1 |
| 052 | Invalid Index &1 |
| 053 | Invalid BCC |
| 054 | Invalid Header |
| 055 | connection aborted &1 |
| 056 | error message &1 |
| 057 | battery low |
| 058 | field &1 not found |
| 059 | parity error |
| 060 | invalid license |
| 061 | no license |
| 062 | license expired |
| 063 | invalid sign |
| 064 | invalid exponent |
| 066 | command not executable |
| 067 | scale sends net weight |
| 068 | &1 missing |
| 069 | license limit &1 exceeded |
| 070 | unknown function &1 |
| 071 | no matching rule found |
| 073 | Parameter &1 does not exist |
| 074 | baud rate &1 invalid |
| 075 | data bits &1 invalid |
| 076 | stop bits &1 invalid |
| 077 | parity &1 invalid |
| 078 | scale terminal switched off |
| 079 | weight value below minimum load |
| 080 | Initialisation |
| 081 | Converter defective |
| 082 | error in scale configuration |
| 083 | unacceptable weight |
| 084 | no motion since last weighing operation |
Scale Connection
Any information in the text serves for informational purposes only and is not legally binding.
All names of products and services are trademarks of their respective companies.
All names of products and services are trademarks of their respective companies.
